Ethernet Option Not Showing Windows 10
Введение:
В этой статье, we will discuss the issue of the Ethernet option not showing up in Windows 10. We will provide a step-by-step guide to troubleshoot and resolve this problem.
я. Check Hardware Connections:
The first thing to do when encountering this issue is to ensure that the Ethernet cable is securely connected to both the computer and the modem/router. Кроме того, check if there are any physical damages to the cable that may be causing the problem.
II. Update Drivers:
Outdated or incompatible drivers can often be the cause of the Ethernet option not appearing in Windows 10. Follow these steps to update your network drivers:
1. Нажмите клавишу Windows + X and select Device Manager from the menu.
2. Expand the Network adapters section.
3. Right-click on your Ethernet adapter and select Update driver.
4. Choose the option to automatically search for updated driver software.
5. Wait for Windows to search for and install any available updates.
6. Restart your computer and check if the Ethernet option is now visible.
III. Enable Ethernet in Device Manager:
Иногда, the Ethernet adapter may be disabled in the Device Manager, leading to the option not being shown in Windows 10. Here’s what you can do:
1. Повторить шаг 1 и 2 from the previous section to open Device Manager.
2. Right-click on your Ethernet adapter and select Enable. If the option says Disable instead, it means that the adapter is already enabled.
3. Close the Device Manager and check if the Ethernet option is now displayed.
IV. Reset TCP/IP Settings:
Issues with TCP/IP settings can prevent the Ethernet option from appearing. Follow these instructions to reset the TCP/IP settings:
1. Нажмите клавишу Windows + X and select Command Prompt (Admin) from the menu.
2. In the Command Prompt window, type the following commands one by one and press Enter after each:
сброс netsh winsock
netsh int ip сброс
ipconfig /выпуск
ipconfig /обновить
3. After executing these commands, restart your computer and check if the Ethernet option is now showing up.
В. Perform a Network Reset:
Если все остальное не удается, you can try performing a network reset. This will reinstall and reset all network adapters and settings on your computer. Однако, please note that this will remove all saved Wi-Fi networks and passwords. Proceed with caution:
1. Нажмите клавишу Windows + I to open Settings.
2. Go to Network & Интернет.
3. Scroll down and click on Network reset.
4. Click on Reset now and confirm your choice when prompted.
5. Wait for the process to complete and restart your computer.
6. Check if the Ethernet option is now visible.
Заключение:
The Ethernet option not showing up in Windows 10 can be a frustrating issue, especially when a wired internet connection is needed. By following the troubleshooting steps outlined in this article, you should be able to resolve this problem and regain access to your Ethernet connection.
